It is common for later models of both trucks and cars to use electronics to record and measure road speed. However, many of these vehicles use cables to drive the speedometers. Individuals who use cable speedometers should have knowledge of the symptoms of faulty Custom Speedometer Cables in Phoenix AZ. Here are the most obvious signs to look for.
Lack of Lubrication in Cable
Most speedometers usually have a pin that has a spot for the meter needle to rest whenever no forward speed is being generated. This needle pins down whenever the vehicle goes a speed that exceeds the meter range or if the vehicle stops. If the cable is defective, or if there is a lack of lubrication, the cable can lope rhythmically when forward motion occurs.
Speedometer Not Registering Speed
A major sign that something is wrong with the speedometer is if it fails to register speed properly. Perhaps the LED lights are not registering speed on the dash or the speedometer no longer moves. These are both signs that it is time for a Custom Speedometer Cables in Phoenix AZ.
Squealing Is Heard Below the Vehicle or on the Dashboard
One obvious sign that the speedometer cable is failing is if it makes a squealing noise. These noises may be heard either from the dashboard where the speedometer is located or from underneath the vehicle where the transmission is. It is important to take action as soon as these sounds are heard before more damage occurs.
When the Speed Fluctuates
Every speedometer should have a smooth transition when it comes to adjusting speeds. Regardless of whether an individual accelerates or decelerates in the car, it should show the speed in a progressive way. For example, if the speed jumps from 35 to 45 quickly, this is a warning flag that the cable is about to go out and it is time to look into getting a new one. If any of the above issues are occurring on a vehicle, it is time to look into custom-made cable speedometers. Contact a well-known company like Dick’s Speed-O-Tach for more information regarding a replacement.
