Avoid Overflows and Blocked Drains Using Drain Cleaning in Wilmington, DE

by | Sep 2, 2016 | Plumbing and Plumbers

There are certain indications that the drains in a building are having problems. Consider the case of a home with an unknown clog in the main sewer lines. This particular problem affects all the drains in the building and is usually noticeable by the slow or bubbling way that water exits a tub or sink.

Slow drains in all rooms typically mean the problem is in a common line. Issues with a single sink, tub or shower are often local to that fixture. For example, a bathroom sink that slowly drains would often be clogged with gunk and hair left over from shaving. Eliminating this problem usually requires expert drain cleaning in Wilmington, DE. However, this type of problem can be repaired by a handyman without too much concern. In fact, the repair involves the simple removal and cleaning of the P-trap connected to the specific drain.

Issues with the main line will always require the skills of an expert. This is partly because this job uses specific tools for each task. For instance, plumbers use a video snake to examine the pipe for damages or the cause of a blockage. This is often the first step in drain cleaning in Wilmington, DE, because the plumber needs to know the condition of the pipe and what is causing the blockage. The use of a properly lit video system makes this possible.

Once the problem is found, the contractor will need to decide the best way to repair it. If the problem is a break or crack, it may be possible to use a less invasive repair method known as a ‘trenchless’ sewer repair. This job uses a thin-walled pipe which is inserted into the existing sewage line. It is not as durable as a replacement, but it is much cheaper than ripping up the lawn and installing a new line.

If the pipes are frequently blocked, then the contractor may recommend a high-pressure wash to clean away any gunk. This often happens on a slow moving sewer line because the slow moving solids rub off on the pipe walls and snag any debris that passes by. Given enough time, a heavy blockage will occur and the pipe eventually gets stopped up.

Recent Posts



Related Posts