Septic pumps are crucial to remove solid and liquid waste from residential homes. They are used when the septic system happens to be placed on an elevated area such as a hill or if the area known as a leach field is located higher than the septic system. The homeowner will be alerted to possible Septic Pump Replacement by an alarm that warns of impending disaster. Here are some tips on how to get this done.
- If the toilets within the house are not draining properly or are not flushing as they should be, this indicates there is a problem with the grinder pump. This is also true if there is waste back-up developing in a basement area. However, if the waste is not being delivered to the drain field as it should, this would be the fault of a sump pump that is in need of repair.
- The broken pump will need to e located. Any pumps having to do with septic systems are generally located in the basement of the home. The grinder pump will be attached to a pipe that drains directly into the septic system. There will be many wires attached to the pump so pay close attention as to where the wires are connected, so reattachment will not pose a problem. Remember to turn off all electricity to the pumps before attempting any removal.
- Connect the wires to the new pump according to the instructions that came with it. Follow the instructions explicitly to avoid any electrical accidents. After the wires have been properly connected, turn the electricity back on and verify the pump is in good working order.
- The final step in Septic Pump Replacement is to replace the sump pump. To do this, simply unplug the pump from the wall outlet and lift it out of the sump pit. In a gentle fashion, remove the piping to inspect the valve.
- Replace the old pump with new one by simply doing the same steps only in reverse. Voila! The job is complete.
Occasionally, there are problems that may be unforeseen of which require professional methods. In a case like this, contact an experienced company such as website.com.
